Teva x Swarovski x HonestlyWTF

I’ll never forget my first pair of Tevas. It was the day before a week long river rafting trip down the legendary Salmon River – my first ever legitimate outdoor excursion – and I had knots in my stomach. Besides feeling the need to impress my husband (new boyfriend at the time) and not being sure of what I was getting myself into (I’m a city girl!), I quickly realized I came to Idaho completely unprepared without the proper gear. I needed a pair of river-appropriate sandals. Thankfully, Tevas were in abundance and in addition to sunscreen, those sandals were the only real essential needed. Our river adventure turned out to be one of the most memorable trips of my life so far and every time I spot a pair of Tevas, I’m reminded of it. Nearly a decade later, Teva came knocking at my door . . .

When I first learned that Teva was teaming up with Swarovski for a DIY collaboration, I thought that there couldn’t be a more divergent pairing of brands. But of course, that immediately piqued my interest and I couldn’t resist getting involved. Especially since I’m such a huge fan of both Teva and Swarovski. So for the past several months, we’ve worked together on creating a DIY kit inspired by my love of the great outdoors and my even greater love of fashion. I created a simple tribal pattern, using Swarovski’s easy to apply hot fix metallic transfers, that could easily be be taken apart, turned into various other shapes and thus, translated into numerous designs. It’s meant to be fun – and to allow your creativity to take you anywhere!! That’s what DIY is all about, isn’t it? Below is a design I came up with but really, anything is possible . . . hope you guys love it and are inspired to try it for yourself!

The kit includes:

  • a pair of Teva Original Universal or Flatform Universal
  • Swarovski hot fix metallic and crystal transfers
  • 8 Swarovski single stone crystals
  • Crystal Katana (crystal applicator)
  • E6000 glue
  • embroidery floss

You’ll need:

  • a flat iron
  • scissors
  • a toothpick
  • an embroidery needle (optional)

Start by cutting around the transfer film, close to the design. Peel the paper backing off the Swarovski crystal transfer.

teva4

Place the film, sticky side down, onto the strap of the sandal. Set the flat iron on a medium-high setting. With the clear plastic film still adhered to the top of the crystals, sandwich the crystal transfer on the closed strap between the heated flat iron. Apply moderate pressure without moving the iron. Release the iron after approximately 10-20 seconds and repeat the process on other sections.

teva5

Allow to cool for about 10 seconds, press the crystals firmly against the strap and slowly remove the plastic film. If any crystals stick to the film, press them back down and repeat the heat application. Another option is to remove the film completely and place the crystals on the strap individually and reheat with the iron. While the crystals and metallic pieces are still warm, you can use a toothpick to adjust or nudge them in place.

teva6

To apply the fancy single set crystals, squeeze a dollop of E6000 onto a scrap piece of cardboard or paper. I like using those wooden ice cream spoons! Use a toothpick to scoop up a pin size amount of glue and place it on the backside of the crystal. Place the crystal on the strap and hold in place for about 2-3 minutes. Crystals applied with E6000 should be allowed to dry overnight. Test the crystals by budging them with your fingers. If they aren’t secure, you can peel them off with some force and reapply with more glue.

teva7

If you choose to apply the tiny metallic studs to the sole, remove the studs and place them face up on a flat surface. Use a toothpick to dot glue onto the shoe. Then quickly pick up each stud with the Crystal Katana and place over the glue. Press, hold for 2 seconds and release the applicator. Because the studs have glue already attached to the bottom, you can also apply them onto the straps using the flat iron.

teva8

There are so many ways you can play with the elements in the kit. We’ve included embroidery floss so that you can make tassels or personalize the Tevas by stitching a name, phrase or initials. Below is a design inspired by constellations using just the metallic studs, single set crystals and embroidery floss.

Here are the flatforms . . . in case you want to take your design to new heights!

The most important thing is to just have fun with it! Design a pair for you and get your friends in on it too. And in case you’re in LA this Wednesday on November 4th, stop by Nordstrom at The Grove for our special DIY event from 6-8pm. We can design a pair of Tevas together!

(DIY kits available at Nordstrom and at Teva.com; check out how the kit came together here)

Leave a Comment cancel comment

22 Comments

  1. Michelle wrote:

    It’s really amazing what you can do with a few rhinestones! I find those sandals really really beautiful!
    https://www.makeandmess.com/

    11.2.15
    Reply
  2. Carson wrote:

    That’s awesome – I found them here on http://www.nordstrom.com/c/womens-sandals

    11.2.15
    Reply
  3. Briana wrote:

    Love this DIY so much, can’t wait to make a pair of my own 😀

    11.2.15
    Reply
  4. Kity wrote:

    Hello!
    You did a great job with those sandals, both look great.
    kisses
    Kity from http://www.thekityshoes.com/

    11.2.15
    Reply
  5. Prudence wrote:

    It’s so cool to be able to design your own flatforms with crystal embellishments! This looks like a fun project, thanks for sharing!

    Prudence
    http://www.prudencepetitestyle.com

    11.2.15
    Reply
  6. Kymberley wrote:

    Amazing!

    11.2.15
    Reply
  7. Maarit wrote:

    I love this idea.

    11.3.15
    Reply
  8. Julie wrote:

    This is so good! I love how Teva made a comeback this last summer, perfect way to spice them up even more!

    j.
    http://www.outstyled.com/

    11.5.15
    Reply
  9. jomurlas2 wrote:

    Hat is such a cool project, really creepy!
    http://100dondoko.com/

    10.20.17
    Reply
  10. roloba wrote:

    What a good approach to the subject, also think so.
    http://london-escorts-agency.co

    10.27.17
    Reply
  11. Great blog. I really like reading it. http://my-mannequins.co.uk/

    10.31.17
    Reply
  12. He yells ᧐ut that acid rain іs on itѕ wɑy.

    11.23.17
    Reply
  13. I’m impressed, I must say. Rarely do I encounter
    a blog that’s equally educative and entertaining, and let me tell you, you have hit the
    nail on the head. The issue is something which not enough men and women are speaking intelligently about.
    Now i’m very happy that I came across this in my hunt
    for something relating to this.

    4.8.18
    Reply
  14. Every weekend i used to pay a quick visit this site, because i want enjoyment,
    since this this website conations genuinely pleasant funny
    information too.

    7.30.18
    Reply
  15. Jennifer David wrote:

    I love how you embellish them with an extra bit of embroidery floss. Thanks for sharing the pictures.

    11.26.18
    Reply
  16. ecovian wrote:

    Awesome article once again! Thumbs up;)

    1.11.19
    Reply
  17. Great work.

    5.18.20
    Reply
  18. Nora Nash wrote:

    I adore the way you add a little additional embroideryfloss to them for decoration. I appreciate you sharing the photos.

    1.5.24
    Reply